Solicitation

W911S225U0516: 120-155mm Cannon Laser Bore/ Chamber Add-on Kit

Update

Cancel Notice

Notice ID

Solicitation Type

Update Number

Public Posting Link

Response Date

Response Date Time Zone

Set Aside Code

Description

New 120-155mm Cannon Laser Bore Chamber Add-on Kit capability for 120-155mm cannon gun tubes. This acquisition shall be capable of use for:  Precision non-contact bore measurement of 120-155 mm cannon smooth and rifle gun tubes. Measurement to the end of the muzzle with a guide tube adaptor that attaches to the muzzle, for supporting none-contact gauge and rigid or self-propelled delivery unit Laser cannon tube bore and chamber gauging kit shall employ a set of opposed high-resolution sensors that are automatically none-contact the bore chamber along its length to muzzle end of cannon tube.1. The 120mm Cannon Laser Add-on Bore Gauging Kit shall be operated as a complete turn-key unit and include the following major components:120mm Cannon Bore Chamber Add-on kit Guide tube assembly Certified calibration ring (5 steps) Laser Bore Chamber Calibration Workspace Software2. The 155mm Cannon Laser Add-on Bore Gauging Kit shall be operated as a complete turn-key unit and include the following major components:155mm Cannon Bore Chamber Add-on kit Guide tube assembly Certified calibration ring (5 steps) Laser Bore Chamber Calibration Workspace Software3. The Laser bore chamber scanning modules shall meet the following specifications Axial scan resolution: 0.25mm (0.01 inch) minimum Rotary scan resolution: 0.1mm (0.004 inch) minimum Sensor Resolution: 0.005mm (0.00025 inch)Laser spot size: 0.050mm (0.002 inch) minimum Measurement repeatability: 0.012mm (0.0005 inch)Measurement Accuracy: minimum of 0.025mm (0.001 inch) in bore and 0.05mm (0.002”) in bore chamber Angular Sampling Resolution: Variable – up to 0.1 degrees per sample (3,600 samples per revolution)Measuring Range (diameter):  Chamber Bore Size	Minimum Range	Maximum Range120mm	4.7000 in	6.3000 in155mm	6.1950 in	6.8000in 4.Each Calibration Ring shall have five steps (diameters) minimum within the center 75% of the range of the gauge The Calibration Rings shall be measured with a NIST-traceable. A2LA Accredited, ISO 17025 and ANS/INCL Z540-1-1994 standards5.Automatic Sensor Calibration software shall be capable of conducting an automatic calibration routine Calibration Software shall provide a Pass/Fail display of calibration test results If the calibration fails, the software shall automatically calculate corrected calibration parameters Calibration software shall allow the operator to manually adjust offset and slope of the calibration algorithm6. Data analysis shall be supported by existing analysis software, with modification if required to meet the requirements in this specification Analysis modules for post processing of data including but not limited to calculating: land and groove diameter, area, statistics, reference subtraction, rotate data, remove centering offset, remove undefined data, remove bad data, variable median filter, averaging filter

Points of Contact

Primary Contact Name

Primary Contact Email

Primary Contact Phone Number

Primary Contact Fax

Update Details

Subject

Posting Date

Archive Date

Product or Service Code

NAICS

Place of Performance Zip Code

Place of Performance Address

US ARMY YUMA PROVING GROUNDYUMA, AZ 85365

Recovery Act

Yes

Contract Information

Contracting Office DoDAAC

Contracting Office Name

Contracting Office Address

MICC  FORT DRUM 4205 PO VALLEY RD FORT DRUM  NY  13602-5220 FORT DRUM NY 13602-5220 USA

A Material Safety Data Sheet (MSDS) must be attached to offer submissions in accordance with FAR Clause 52.223-3.

Attachments

Name	Number	File/URL	Date	Document Type	Include in Response
W911S225U0516_S2P2_Brand_Name_or_Equal_Le__David_V_CIV_USARMY_ATEC__USA__2025_04_14_13_31_00__EST_		W911S225U0516_S2P2_Brand_Name_or_Equal_Le__David_V_CIV_USARMY_ATEC__USA__2025_04_14_13_31_00__EST_.pdf	2025-04-14	Attachment	No

Update / Notice

Update / Notice ID	Description	Posted Date	Response Date
0002	US Army Yuma Proving Ground shall furnish to contractor following test items for upgrade, system configuration and integration:120mm scanner /sensor hard-sided shipping storage case120mm GTA hard-sided shipping storage case155mm scanner /sensor hard-	2025/03/13 19:13 UTC	2025-03-19 12:55 Mountain Standard Time
0001	US Army Yuma Proving Ground shall furnish to contractor following test items for upgrade, system configuration and integration:120mm scanner /sensor hard-sided shipping storage case120mm GTA hard-sided shipping storage case155mm scanner /sensor hard-	2025/03/13 18:50 UTC	2025-03-19 12:55 Mountain Standard Time
W911S225U0516	US Army Yuma Proving Ground shall furnish to contractor following test items for upgrade, system configuration and integration:120mm scanner /sensor hard-sided shipping storage case120mm GTA hard-sided shipping storage case155mm scanner /sensor hard-	2025/03/12 20:02 UTC	2025-03-19 12:55 Mountain Standard Time